Pelco VMX300-E Network Card User Manual


 
C1552M-C (7/07) 21
Mounting
Mount the VMX300(-E) in an EIA-standard 19-inch (48.26 cm) equipment rack, or place it on a flat surface, such as a shelf or table.
Follow these instructions to mount the VMX300(-E) in an equipment rack:
1. Attach the two brackets to both sides of the VMX300(-E).
2. Attach the mounting rails to the equipment rack.
3. Place the workstation onto the mounting rails. It should slide in and out of the rack easily.
4. Fasten the rack ears to the equipment rack.
Figure 14. Rack Mount Installation
RACK
VMX300(-E)
(8) SCREWS,
10-32 X 0.375-INCH,
FLAT HEAD
(6) SCREWS,
8-32 X 0.375-INCH,
PAN HEAD WITH
WASHERS
BRACKET
(SIDE VIEW)
REAR MOUNTING RAIL
FRONT MOUNTING RAIL
RACK EAR
(4) SCREWS,
10-32 X 0.375-INCH,
FLAT HEAD
(6) SCREWS, 8-32 X 0.250-INCH,
PAN HEAD
(4) SCREWS,
10-32 X 0.750-INCH,
PHILLIPS, PAN HEAD
WITH WASHERS
SLOTTED HOLES
TOWARD FRONT
OF UNIT
TAPERED ENDS
TOWARD REAR
OF UNIT