Filter
Top Products
Network Commands 115
IPv6 Tunnels
Show IPsec
IPsec
IPv6 Tunnels
Add IPv6tunnel
email
Up to a 64 character entry for an email address; for example, acct@anycompany.com.
This field is case sensitive in order to successfully match the information in the remote
X.509 certificate. An asterisk (*) works as a wildcard.
secret
When the Authentication Method is set to Shared Secret, enter the case-sensitive
secret word. Maximum of 16 characters, spaces not allowed. The secret is shared for all
IPsec and L2TP/IPsec tunnels.
use-nat-traversal
NAT Traversal should be enabled when the IOLAN is communicating through a
router/gateway to a remote VPN that also has NAT Traversal enabled. By default, this is
enabled.
Description Dispalys an IPsec tunnel.
User Level Admin
Syntax
show ipsec <config_tunnel_name>
Option <config_tunnel_name>
Displays the configuration information for the specified IPsec tunnel.
Description Controls the state of all IPsec tunnels.
User Level Admin
Syntax
ipsec start|stop|restart|status
Options start
Starts all IPsec VPN tunnels.
stop
Stops all IPsec VPN tunnels.
restart
Stops and then starts all IPsec VPN tunnels.
status
Used strictly for debugging, displays trace data for all IPsec tunnels.
Description Addes a new IPv6 tunnel.
User Level Admin
Syntax
add ipv6tunnel <tunnel_name>
Option <tunnel_name>
Adds the specified IPv6 tunnel.