Filter
Top Products
Dynamic DNS Commands
44 IOLAN SDS/SCS/STS CLI Reference Guide, Version 3.6
Dynamic DNS Commands
Set Dynamic-DNS
Set Dynamic-DNS SSL
Description Configures the dynamic DNS parameters.
User Level Admin
Syntax
set dynamic-dns [on|off]
[connection-method http|http-port-8245|https]
[hostname <hostname>] [username <username>]
[password <password>] [system-type dynamic|static|custom]
[wildcard enable|disable|nochange]
Options connection-method
Specify how the IOLAN is going to connect to the DynDNS.org server, via HTTP,
HTTP through Port 8245, or HTTPS.
hostname
Specify the registered hostname with DynDNS.org that will be updated with the
IOLAN’s IP address should it change. Put in the full name; for example,
mydeviceserver.dyndns.org.
username
Specify the user name used to access the DynDNS.org server.
password
Specify the password used to access the DynDNS.org server.
system-type
Specify how your account was set up with DynDNS.org, using a Dynamic, Static, or
Custom IP address schema.
wildcard
Adds an alias to *.yourhost.ourdomain.ext pointing to the same IP address as
entered for
yourhost.ourdomain.ext.
Description Sets the SSL/TLS parameters for the connection between the IOLAN and the DNS
server.
User Level Admin
Syntax
set dynamic-dns ssl [verify-peer on|off]
[validation-criteria
country <code>|state-province <text>|locality <text>
|organisation <text>|organisation-unit <text>
|common-name <text>|email <email_addr>]
Options verify-peer
Enable this option when you want the Validation Criteria to match the Peer Certificate
for authentication to pass. If you enable this option, you need to download an SSL/TLS
certificate authority (CA) list file to the IOLAN.
validation-criteria
Any values that are entered in the validation criteria must match the peer certificate for
an SSL connection; any fields left blank will not be validated against the peer
certificate.