Filter
Top Products
TFTP File Transfer Commands
128 IOLAN SDS/SCS/STS CLI Reference Guide, Version 3.6
Set Bootup
Show ARP
Show Bootup
TFTP File Transfer Commands
Netload
Description Specifies remote the TFTP host and pathname for files to be loaded after a IOLAN
reboot.
User Level Admin
Syntax
set bootup firmware host <hostname> [file <path_filename>]
set bootup configuration host <hostname> [file <path_filename>]
Options firmware file
The path and file name, relative to the default path of your TFTP server software, of the
update software for the IOLAN that will be loaded when the IOLAN is rebooted.
configuration file
The path and file name, relative to the default path of your TFTP server software, of the
configuration software for the IOLAN that will be loaded when the IOLAN is rebooted.
host
The host name or IP address of the server that contains the configuration or firmware
file. If you use a host name, it must exist in the IOLAN’s host table or be resolved by
DNS.
Description Shows the current contents of the ARP cache.
User Level Admin
Syntax
show arp
Description Shows the Firmware and Configuration files specified for IOLAN bootup.
User Level Admin
Syntax
show bootup
Description Transfers a file from a remote host to the IOLAN using the TFTP protocol.
User Level Admin
Syntax
netload text-config|factory-default-config|firmware|
configuration|customlang|term1|term2|term3|customapp-file|
wan-driver <hostname/IP_address> <filename>
Options text-config
Specify this option if you are uploading a text-based configuration file to the IOLAN
from a TFTP server.
factory-default-config
Specifies the configuration file that you are going to load from a TFTP server to the
IOLAN that will act as the factory default configuration. See the User Guide for
directions on how to revert back to the original factory default configuration, if
required.
firmware
Specifies that you are going to download a new firmware file to the IOLAN.