Filter
Top Products
Configuring the Wireless ADSL Modem Router
17
SNMP Trap
Specify the IP address of the NMS to notify when a significant event is
detected by the agent. When a trap condition occurs, the SNMP agent
sends an SNMP trap message to any NMS specified as a trap receiver.
4.7 UPNP
UPNP (Universal Plug and Play) settings
With Universal Plug and Play, a device can automatically join a network,
obtain an IP address, communicate its capabilities, and learn about the
presence and capabilities of other devices. Devices can then directly
communicate with each other. This further enables peer-to-peer
networking.
4.8 QoS
The QoS Settings page allows the user to configure the bandwidth
allocation for each forwarding behavior. The QoS settings are described
below :
"Name" - Displays the name of the forwarding method, i.e., ’Best Effort’,
’Assured Forwarding’ or ’Expedited Forwarding’.
"Description" - Briefly describes the forwarding method employed.
"Priority" - ’Best Effort’ will have lowest priority as it is a basic
connectivity service with no guarantees. ’Expeditd Forwarding’ will have
highest priority. It provides low delay, low jitter and low loss delivery of
packets.
"Bandwidth Allocation" - You choose the minimum bandwidth for each
forwarding method.
Traffic Mapping
Traffic Mapping allows you to describe up to 16 rules to classify traffic
into forwarding groups. You must specify the traffic type, the forwarding
method and the outgoing virtual connection (VC) that this traffic will be
routed to.
Traffic Statistics
The Traffic Statistic screen displays the outbound traffic statistics for all
forwarding methods over a 12 hour period.
4.9 DDNS
DDNS (Dynamic DNS) settings
DDNS text "Domain Name" is a series of alphanumeric strings
separated by periods that maps to the address of a network connection
and identifies the owner of the address.
Dynamic DNS provides users on the Internet with a method to tie their
domain name to a computer or server. DDNS allows your domain
name to follow your IP address automatically by having your DNS
records changed when your IP address changes.
The Server Configuration section automatically opens the TCP port
options checked in the Virtual Server section. Simply enter in the IP