Filter
Top Products
Configuring the Wireless ADSL Modem Router
18
Address of your server, such as a web server, and then click on the port
option HTTP Port 80 so users can access your web server from the
Internet connection.
This DNS feature is powered by a DDNS service provider. With a
DDNS connection you can host your own web site, email server, FTP
site, and more at your own location even if you have a dynamic IP
address. (Default : Disable)
4.10 Routing
These pages define routing related parameters, including static routes
and RIP (Routing Information Protocol) parameters.
Static route
1- Click "Add" to add a new static route to the list
2- Click "SAVE SETTINGS" to save the configuration
RIP parameters
RIP sends routing-update messages at regular intervals and when the
network topology changes. When a router receives a routing update
that includes changes to an entry, it updates its routing table to reflect
the new route. RIP routers maintain only the best route to a destination.
After updating its routing table, the router immediately begins
transmitting routing updates to inform other network routers of the
change.
Routing table
4.11 SET UP WiZARD
Getting started
Make sure that you have a working ADSL subscription and that the
ADSL Wireless Base Station is connected to the ADSL phone line. You
can verify that the cable is connected correctly by looking at the ADSL
light on the top of the ADSL Wireless Base Station. The ADSL light
should be on solid after approximately 1 minute.
Wireless settings
In step 2 you can change the Wireless settings of the ADSL Wireless
Base Station. For easy installation it is advised to keep the default
settings. If you later would like to change any of the wireless settings you
can do so via the menu in the ADSL Wireless Base Station.