Filter
Top Products
SmartResponse is exclusive Philips technology that adjusts response time to application
requirements, delivering faster response times for gaming and videos or better color
saturation for viewing photos and static images.
SmartTouch controls
SmartTouch controls are intelligent, ultra-responsive, touch sensitive icons that replace
protruding buttons. Responding to your lightest touch, SmartTouch controls, for example,
power up your monitor or brighten and sharpen your display with LightFrame™. When
activated, SmartTouch icons glow to indicate that your commands have been implemented.
Stand-alone audio function
Built-in advanced firmware that delivers audio output from external audio devices including
a portable tape, CD or MP3 player even when there is no video input.
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g.
digital cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB
compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors
are calibrated and you can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed
to a predefined setting as well as the color gamut. Therefore it is important to select the
sRGB setting in the monitor's OSD.
To do so, open the OSD by pressing the OK button on the side of your monitor. Move the
down button to go to Color and press OK again. Use the right button to go to sRGB. Then
move the down button and press OK again to exit the OSD.
After this, please do not change the brightness or contrast setting of your monitor. If you
change either of these, the monitor will exit the sRGB mode and go to a color temperature
setting of 6500K.
Other:
USB plug: An upstream and a downstream USB plug is provide for user's convenience.
RETURN TO TOP OF THE PAGE
T
TFT(thin film transistor)
Usually made from amorphous silicon (a-Si) and used as a switch to a charge storage device
located below each sub-pixel on an active matrix LCD.