Filter
Top Products
10 Philips · IPF 520 · 525 · 555
EN
3 Remove the cartridge from the packing and remove the
protective strips.
4 Insert the cartridge into the holder with the coloured
end facing front and the contacts facing down.
5 Press the cartridge down until it snaps into place.
6 Close the device by folding the document holder down
and swivelling the metal bracket upward.
7 Then close the control panel.
Initial Installation
After you connect your device to the mains voltage, the ini-
tial installation commences.
Starting Initial Installation Process
Printing the Func tions List
Selecting the Language
1 Use [ to select the desired display language.
2 Confirm with o.
Selecting the Country
Setting the Cou ntry Correctly
Setting the Cou ntry
1 Use [ to select the country in which you are operat-
ing the device.
2 Confirm with o.
CAUTION!
Remove the Protection Strip!
Please make certain that the protective strip
has been completely removed. Be careful not
to touch the nozzles or contacts.
Notice
Only Insert Cartridge When Con-
nected to the Electric Power Source
Only insert the cartridge if the device is con-
nected to the electricity power supply. Oth-
erwise, the cartridge will not be detected.
Notice
Starting Initial Installation Process
You can start the initial installation at a later
point of time using MENU and 1 also
Notice
Printing the Functions List
You can print the menu overview using MENU
and 2.
CAUTION!
Setting the Country Correctly!
You must set the country in which you are oper-
ating the device. Otherwise your device is not
adapted to the telephone network. If your coun-
try is not included in the list, you must select a
different setting and use the correct telephone
cable for the country. Consult your retailer.