Filter
Top Products
SMS · Composing SMS 25
EN
Replying an SMS
You can add text to a received SMS and reply to the sender.
1 For the relevant SMS, press o.
2 Select using [
ANSWER.
3 Confirm with o.
4 You can modify the message, or add text to it.
5 Confirm with o.
6 Using [ select
YES to transmit the SMS or NO to edit
the SMS.
7 Confirm with o. The SMS is sent back to the sender.
Composing SMS
You can enter and save SMSs without sending them. These
SMSs are saved as
SMS WRITTEN. You can save up to five
SMS WRITTEN.
1 Press _.
2 Using [ select
WRITE SMS.
3 Confirm with o.
4 You can enter characters using the numeric keys (see
button labels).
5 Confirm with o. The SMS is saved.
Printing SMSs
1 Press _.
2 Using [ select
SMS RECEIVED, SMS SENT or
SMS WRITTEN.
3 Confirm with o.
4 Select using [
DISPLAY LIST.
5 Confirm with o.
6 Using [ select the SMS that you would like to print.
7 Confirm with o.
8 Select using [
PRINT.
9 Confirm with o. The selected SMS is printed.
Print list of all SMS messages ljet 3
Deleting SMS
SMS Deletion In troduction
If the message memory is full, the device cannot receive
any more messages. Delete SMS messages to free up mem-
ory.
Your device can save 30 received SMSs, 5 composed and
sent SMSs and 5 templates, which are not yet sent.
1 Press _.
2 Using [ select
SMS RECEIVED, SMS SENT or
SMS WRITTEN.
3 Confirm with o.
4 Using [ select
DISPLAY LIST.
5 Confirm with o.
6 Using [ select the SMS that you would like to delete.
7 Confirm with o.
8 Using [ select
DELETE.
9 Confirm with o. The selected SMS is deleted.
Modifying the Settings
Changing Transmitting and
Receiving Numbers
All numbers that you need to send and receive SMSs are
stored in your device. In case you moved to another tele-
phone service provider, you must change these numbers.
1 Press _.
2 Using [ select CONFIGURATION.
3 Confirm with o.
4 Select using [
SERV.CENTRE NO..
5 Confirm with o.
6 Select using [ TX SERV. CENTRE.
7 Enter the number for sending SMS messages.
8 Confirm with o.
9 Select using [
RX SERV. CENTRE.
10Enter the number for receiving SMS messages.
11Confirm with o.
12You can exit with j.
Switching off Audio Signal for SMS
Reception
The reception of an SMS is indicated by a notification
tone. You can switch this notification tone off.
1 Press _.
2 Using [ select
CONFIGURATION.
3 Confirm with o.
4 Using [ select
SMS RX ADVICE.
5 Confirm with o.
6 Using [ select whether notification tone for the
reception of SMS is to be on or not.
7 Confirm with o.
8 You can exit with j.
Notice
You can enter special characters using 0.
Enter special characters using * or #.
Using f x switch the input area between
small and capital letters.
You can move the cursor using u.
Use C to delete individual characters.
Press and hold C (at least two seconds) to
delete the entire text.
Notice
You can print a list of all SMS messages in the
selected folder, if you select
PRINT LIST
instead of DISPLAY LIST using [.