Filter
Top Products
Initial Operation · Initial Installation 11
EN
Activating the Printing Head
1 Confirm NEW PRINT CART.? using 1 to set the
ink level memory to "full“.
2 A test page is printed.
3 Check the print sample for interruptions.
4 If necessary, repeat the printing using 0.
5 You can finish using 1 and j.
Entering the Date and Time
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [
FAX SET-UP.
3 Confirm with o.
4 Confirm
DATE AND TIME with o.
5 Select using [
SET DATE/TIME.
6 Confirm with o.
7 Enter the date (two digits each) e.g.
080608 for 08.06.08.
8 Enter the time, e.g. 1400 for 2 pm.
9 Confirm with o.
10You can exit with j.
Time and Date A fter a Short Power Failure
Notice
Format of Time and Date
Select further settings in step 5 using [
DATE FORMAT—Change the date format
HOUR FORMAT—Change the time format (12/
24 clock).
Notice
Time and Date After a Short Power
Failure
If SET DATE/TIME appears in the display,
you must adjust the date and time.
1 Press MENU and confirm using o.
2 Enter the date and time with the numeric keys.
3 Confirm with o.