Open as PDF
3 - 4 Users Manual
3.4.3 Front Connection Unit
This section describes the use and capabilities of the Front Connection Unit,
mounted underneath the power supply.
The Front Connection Unit provides the interconnections between the rear and
rammable power supply types have a front connection unit:
le output model: PM2811/x5z
• dual output model : PM2812/x5z
• triple output model : PM2813/x5z
le output model: PM2831/x5z
• dual output model : PM2832/x5z
x = Number assi
ned to various output ratin
z = Country version
Every output channel has been provided with four output terminals, a
terminal, and a SENSE switch.
FOUR OUTPUT TERMINALS
The inner 2 banana sockets are for the power output, i.e., +V and -V. The outer
2 banana sockets are for the sense input, i.e., +S and -S.
ONE GROUND TERMINAL
round (earth)terminal has been connected to the housin
ONE SENSE SWITCH
This switch enables you to select local or remote sensin
from remote to local or from local to remote may cause a
sense break detection. To avoid this, it is advised to switch modes only
at power off.
The maximum volta
e between any terminal and
round : 240 V
The maximum current throu
h an output terminal : 15 A
The maximum current that may be switched : 4 A