Filter
Top Products
15
Advanced PL2 series Accessories.
PLDD-1 Digital display for Model 1250 only.
The PLDD-1 is a digital display to enhance the resolution and repeatability of the Model
1250’s Flash analog slide-pot control. It displays only Flash power, over the full range
of 16 to 500 watt-seconds. Resolution of the PLDD-1 is 0.1 f-stop.
The PLDD-1 should be mounted to the umbrella bracket under the housing of the Model
1250 PowerLight, on flexible rotating mount, or on an extension cable, for better
viewing.
PLDRC-1 Remote digital display and flash adjustment for models
1250DR and 2500DR.
The PLDRC-1 is a digital display to enhance the visibility of, and to change the Flash
power setting. It displays and controls only Flash power, over the full range of watt-
seconds. Resolution is 0.1 f-stop, using the 1/2 f-stop and 0.1 f-stop UP/DOWN buttons.
The PLDRC-1 should be mounted to the umbrella bracket under the housing of the
PowerLight, on rotating mount, or on an extension cable, for better viewing and easier
control accessibility.
PLDIR-2 Remote digital display and Infrared receiver for models
1250DR and 2500DR. (must be used with PLIRC-1 controller)
The PLDIR-2 is a digital display to enhance the visibility of, and to receive infrared
signals to control all functions of the 1250DR and 2500DR PowerLights. It displays both
Flash power and Modeling lamp power and unit number. It has a green READY
indicator and a BI-color indicator for Flash or Model. Behind a small window is an
infrared receiver. Resolution is 0.1 f-stop.
The PLDIR-2 should be mounted to the umbrella bracket under the housing of
the PowerLight, on rotating mount, or on an extension cable, for better viewing
and infrared control.