Filter
Top Products
18
POWERLIGHT QUICK CHANGE ACCESSORIES
UMBRELLAS:
EC32BC 32” White satin flat panel inner umbrella with black blocking outer
umbrella.
EC45BC 45” White satin flat panel inner umbrella with black blocking outer
umbrella.
EC60BC 60” White satin flat panel inner umbrella with black blocking outer
umbrella.
EC32S 32” Silver satin flat panel inner umbrella with black blocking outer
umbrella.
EC45S 45” Silver satin flat panel inner umbrella with black blocking outer
umbrella.
EC60S 60” Silver satin flat panel inner umbrella with black blocking outer
umbrella.
SOFTBOXES:
SB12x36 12”x36” Satin white front panel, silver inner panels with black blocking
outer and Quick-Change bracket.
SB24x32 24” x 32” Satin white front panel, silver inner panels with black
blocking outer and Quick-Change bracket.
SB36x48 36”x 48” Satin white front panel, silver inner panels with black blocking
outer and Quick-Change bracket.
SB48x72 48”x 72” Satin white front panel, silver inner panels with black
blocking outer and Quick-Change bracket.
SB22 22”x22” Satin white front panel, silver inner panels with black blocking
outer and Quick-Change bracket.
SB36 36”x36” Satin white front panel, silver inner panels with black blocking
outer and Quick-Change bracket.
OB48 48” Octagon - 48” Satin white front panel, silver inner panels with black
blocking outer and Quick-Change bracket.
SERVICE
The photographer should not attempt to make repairs.
Consult a dealer for an authorized Photogenic Professional Lighting service agent. This
will provide you safety, insure proper operational functions and provide continuation of
your warranty.
For replacing the flashtube or modeling lamp, follow the directions and specifications
given earlier in this manual in the setup section.
Before removing the old tubes or installing new tubes, always unplug your
PowerLight and discharge the stored energy by pressing the “test” button. Wait
approximately two hours for the main capacitors to deplete any residual stored
wattage. Never place your fingers or any metal objects into the flash or
modeling sockets. Contact with high voltage may result.