Filter
Top Products
R11 Series Drive Command Reference Manual Version 1.00
4.4.4 Current bit of the Feature List
4.4.4.1 Current bit of the Feature List for CD Media
The Current bit of the Feature List for CD media is set as following list. The State No. is described in the
Table 9 – Media states.
Table 13 – Feature List for CD Media
State No.
Feature Name
1 2 3-1
3-2
3-3
3-4
4-1
4-2
4-3
4-4
4-5
0000h: Profile List 1 1 1 1 1 1 1 1 1 1 1
0001h: Core 1 1 1 1 1 1 1 1 1 1 1
0002h: Morphing 1 1 1 1 1 1 1 1 1 1 1
0003h: Removable Medium 1 1 1 1 1 1 1 1 1 1 1
0004h: Write Protect 0 0 0 0 0 0 0 0 0 0 0
0010h: Random Readable 0 1 0 1 1 1 0 1 1 1 1 *a
001Dh: Multi Read 1 1 1 1 1 1 1 1 1 1 1
001Eh: CD Read 0 1 0 0 1 1 0 0 1 1 1 *a
001Fh: DVD Read 0 0 0 0 0 0 0 0 0 0 0
0020h: Random Writable 0 0 0 0 0 0 0 0 0 0 0
0021h: Incremental Streaming
Writable
0 0 1 1 1 0 1 1 1 0 0 *b
0023h: Formattable 0 0 0 0 0 0 1 1 1 1 1
0024h: Hardware Defect
Management
0 0 0 0 0 0 0 0 0 0 0
0026h: Restricted Overwrite 0 0 0 0 0 0 1 *c
*c
*c
1 *b
0029h: Software Defect
Management
0 0 0 0 0 0 0 0 0 0 1
002Ah: DVD+RW 0 0 0 0 0 0 0 0 0 0 0
002Bh: DVD+R 0 0 0 0 0 0 0 0 0 0 0
002Ch: Rigid Restricted Overwrite 0 0 0 0 0 0 0 0 0 0 0
002Dh: CD-Track at Once 0 0 1 1 1 0 1 1 1 0 0 *b
002Eh: CD Mastering 0 0 1 0 0 0 1 0 0 0 0 *b
002Fh: DVD-R/-RW Write 0 0 0 0 0 0 0 0 0 0 0
0033h: Layer Jump Recording 0 0 0 0 0 0 0 0 0 0 0
0037h: CD-RW Media Write
Support
0 0 0 0 0 0 1 1 1 1 1
003B: DVD+R Double Layer 0 0 0 0 0 0 0 0 0 0 0
0100h: Power Management 1 1 1 1 1 1 1 1 1 1 1
0101h: S.M.A.R.T. 0 0 0 0 0 0 0 0 0 0 0
0103h: CD Audio analog play 0 *d
0 *d
*d
*d
0 *d
*d
*d
0
0104h: Microcode Upgrade 1 0 0 0 0 0 0 0 0 0 0
0105h: Time-out 1 1 1 1 1 1 1 1 1 1 1
0106h: DVD-CSS 0 0 0 0 0 0 0 0 0 0 0
0107h: Real-Time Streaming 0 1 1 1 1 1 1 1 1 1 1
0108h: Logical Unit serial number 1 1 1 1 1 1 1 1 1 1 1
010Ah: Disc Control Block 0 0 0 0 0 0 0 0 0 0 0
010Bh: DVD CPRM 0 0 0 0 0 0 0 0 0 0 0
*a: In write operation, if Read command or Play Audio command returns the Check Condition, the current
bit is set to zero.
*b: In write operation, it keeps previous setting.
*c: This Feature indicates that Fixed Packet Writing is allowed. If only one Track is existing and the track
is invisible or Fixed Packet writing, the current bit is set to one.
*d: If Audio Track is existing, the current bit is set to one.
Page 28