Filter
Top Products
R11 Series Drive Command Reference Manual Version 1.00
4 Packet Commands
The following commands are implemented in the drive.
Table 1– Packet Commands
Reference
Command Description
Operatio
n code
SFFC INF-
8090i
MMC-5 This document
BLANK Command A1h 16.1 6.2 4.1
CLOSE TRACK/RZONE/SESSION/BORDER
Command
5Bh 16.2 6.3 4.2
FORMAT UNIT Command 04h 16.3 6.5 4.3
GET CONFIGURATION Command 46h 16.4 6.6 4.4
GET EVENT/STATUS NOTIFICATION Command 4Ah 16.5 6.7 4.5
GET PERFORMANCE Command ACh 16.6 6.8 4.6
INQUIRY Command 12h 16.7 6.9 4.7
LOG SELECT Command 4Ch 4.8
LOG SENSE Command 4Dh 4.9
MECHANISM STATUS Command BDh 16.9 6.11 4.10
MODE SELECT (10) Command 55h 16.10 6.12 4.11
MODE SENSE (10) Command 5Ah 16.11 6.13 4.12
PAUSE/RESUME Command 4Bh 16.12 6.14
PLAY AUDIO (10) Command 45h 16.13 6.15
PLAY AUDIO (12) Command A5h 6.16
PLAY AUDIO MSF Command 47h 16.14 6.17
PLAY CD Command BCh 4.13
PREVENT / ALLOW MEDIUM REMOVAL Command 1Eh 16.15 6.18
Read (10) Command 28h 16.16 6.19 4.14
Read (12) Command A8h 16.17 6.20 4.14
READ BUFFER Command 3Ch 16.18 6.21 4.15
READ BUFFER CAPACITY Command 5Ch 16.19 6.22 4.16
READ CAPACITY Command 25h 16.20 6.23 4.17
READ CD Command BEh 16.21 6.24
READ CD MSF Command B9h 16.22 6.25
READ DISC INFORMATION Command 51h 16.23 6.26 4.18
READ DISC STRUCTURE Command ADh 16.24 6.27 4.19
READ FORMAT CAPACITIES Command 23h 16.25 6.28
READ HEADER Command 44h 4.20
READ SUBCHANNEL Command 42h 16.26 6.29
READ TOC/PMA/ATIP Command 43h 16.27 6.30 4.21
READ TRACK/RZONE INFORMATION Command 52h 16.28 6.31 4.22
REPAIR RZONE Command 58h 16.29 6.32
REPORT KEY Command A4h 16.30 6.33
REQUEST SENSE Command 03h 16.31 6.34 4.23
RESERVE TRACK/RZONE Command 53h 16.32 6.35 4.24
REZERO UNIT Command 01h
SCAN Command BAh 16.33 6.36
SEEK (10) Command 2Bh 16.34 6.37
SEND CUE SHEET Command 5Dh 16.35 6.38
SEND DIAGNOSTIC Command 1Dh 4.25
SEND DISC STRUCTURE Command BFh 16.36 6.39 4.26
SEND KEY Command A3h 16.38 6.40
SEND OPC INFORMATION Command 54h 16.39 6.41
SETCD SPEED Command BBh 16.40 6.42 4.27
SET READ AHEAD Command A7h 16.41 6.43
SET STREAMING Command B6h 16.42 6.44 4.28
START/STOP UNIT Command 1Bh 16.43 6.45
STOP PLAY/SCAN Command 4Eh 16.44 6.46
SYNCHRONIZE CACHE Command 35h 16.45 6.47
TEST UNIT READY Command 00h 16.46 6.48 4.29
Page 7