Filter
Top Products
R11 Series Drive Command Reference Manual Version 1.00
5 Error Code
Following lists all error codes that may return from the drive.
Table 45 - All Error Codes
Sense
Key
ASC ASCQ
Description
08 00 00 BLANK CHECK
0B 00 06 I/O PROCESS TERMINATED, PLAY OPERATION ABORTED
02 04 01 LOGICAL UNIT IS IN PROCESS OF BECOMING READY
02 04 03 LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED
02 04 04 LOGICAL UNIT NOT READY, FORMAT IN PROGRESS
02 04 07 LOGICAL UNIT NOT READY, OPERATION IN PROGRESS
02 04 08 LOGICAL UNIT NOT READY, LONG WRITE IN PROGRESS
04 08 00 LOGICAL UNIT COMMUNICATION FAILURE
04 08 01 LOGICAL UNIT COMMUNICATION TIME-OUT
04 08 03 LOGICAL UNIT COMMUNICATION CRC ERROR
04 09 02 FOCUS SERVO FAILURE
04 09 03 SPINDLE SERVO FAILURE
03 0C 00 WRITE ERROR
03 0C 02 WRITE ERROR - AUTO REALLOCATION FAILED
03 0C 08 WRITE ERROR - RECOVERY FAILED
03 0C 09 WRITE ERROR - LOSS OF STREAMING
03 11 00 UNRECOVERED READ ERROR
03 11 01 READ RETRIES EXHAUSTED
03 11 05 L-EC UNCORRECTABLE ERROR
03 11 06 CIRC UNRECOVERED ERROR
03 11 0B UNRECOVERED READ ERROR - RECOMMEND REASSIGNMENT
03 11 0D DE-COMPRESSION CRC ERROR
03 15 00 RANDOM POSITIONING ERROR
03 15 02 POSITIONING ERROR DETECTED BY READ OF MEDIUM
01 18 05 RECOVERED DATA - RECOMMEND REASSIGNMENT
03 19 00 DEFECT LIST ERROR
05 1A 00 PARAMETER LIST LENGTH ERROR
04 1B 00 SYNCHRONOUS DATA TRANSFER ERROR
05 20 00 INVALID COMMAND OPERATION CODE
05 21 00 LOGICAL BLOCK ADDRESS OUT OF RANGE
05 21 02 INVALID ADDRESS FOR WRITE
05 24 00 INVALID FIELD IN CDB
05 25 00 LOGICAL UNIT NOT SUPPORTED
05 26 00 INVALID FIELD IN PARAMETER LIST
07 27 04 PERSISTENT WRITE PROTECT
06 28 00 NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
06 29 00 POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
06 2A 01 MODE PARAMETERS CHANGED
05 2C 00 COMMAND SEQUENCE ERROR
02 30 00 INCOMPATIBLE MEDIUM INSTALLED
05 30 02 CANNOT READ MEDIUM - INCOMPATIBLE FORMAT
05 30 05 CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
05 30 10 MEDIUM NOT FORMATTED
Page 56