Filter
Top Products
132
CHECK SHEET
<CUBE Adjustment>
1. Preparations
1 Connect the power supply, and connect the cable for input signals and ABL link cable (control cable).
2 Place the connected cables neatly.
3 After completing the above 1 and 2, turn on the power and perform aging for one hour.
4 Prepare the signals required for adjustments.
2. Before Starting Adjustments (Set Conditions)........................................................................... P. 62
1 Set whether to perform the adjustments using the remote control or personal computer.
2 Check the TV SYSTEM setting.
Check the convergence memory and white balance memory used for the adjustments.
3 Check and set the STATUS.
MULTI ON/OFF, COMBINATION ON/OFF, ABL link switch settings (3-levels).
4 Recording the settings in the memory.
3. Setting ID ........................................................................................................................................P. 65
1 Set the ID to each CUBE.
4. Adjusting The Screen
1 Adjust the size of each screen. ....................................................................................................................................... P. 71
2 Adjust the convergence of each screen. ........................................................................................................................ P. 72
3 Adjust the link of each screen. ........................................................................................................................................ P. 73
4 Adjust the W/B of each screen. ....................................................................................................................................... P. 88
5 Adjust the ABL level. ....................................................................................................................................................... P. 92
6 Adjust the color using the image to be transmitted. .....................................................................................................P. 93
7 Check the whole screen.