A SERVICE OF

logo

Open as PDF
next previous
3-11SDC755A
3 • Running Mail
IMPORTANT: Always ensure that your prints are clear
and complete. Poor prints may be rejected by your Postal
Authority. If you notice missing lines in the print as shown
in the illustration, perform a printhead purge as described
on page 7-14 of this guide.
The indicia above is a black and white representation
of the approved Red indicia. Only Red approved ink
should be used in the machine.
Automatically Feeding Envelopes (DM400c)
1. Load envelopes
into the feeder face
up with their top
edges against the
registration wall.
2. Slide the side
guide up to the
envelopes. Allow
clearance so that
envelope feed is not
restricted.
3. Select seal or no-
seal using the
Seal/No Seal Lever.
Mr. John Smith
1925 Main Stree
t
Your Town, US
12345
Start
button
4. Press Start. The system automatically feeds the envelopes,
prints the digital meter stamp and ejects the envelope.
Side Guide
Seal/ No Seal Lever