Pitney Bowes DM500 Postal Equipment User Manual


 
5 • Mailing System Setup
5-30 SV61436 Rev. D
Taking the
Meter Out of
Servi
ce
Call your Pitney Bowes representative if you need to return the postage
meter (contained in the IntelliLink® Control Center) to Pitney Bowes. When
instructed, follow the procedure here.
1. Press the Men
u key and select Set Up.
2. Select T
ake Meter Out of Service.
3. Select T
ransfer Funds from Meter.
This transfers the funds from you
r meter back to your account.
4. The system transfers the funds and displays the a
mount transferred.
To print this amount on an envelope, place an envelope on the feed
deck
and press the Start key. To print on a tape, simply press the Tape
key.
Adding an
Optional
Pr
inter
You can connect a Pitney Bowes USB printer to your mailing system. To
add this optional external printer, all you need to do is plug the USB con-
nector from the printer into one of the two upper-most USB connectors on
the
back of the mailing system base. Your mailing system recognizes the
printer as soon as you plug it into the base.
The dual USB ports are located on the right back corner of the system base
as sho
wn here.
13
14
USB Ports