Filter
Top Products
Installation
Planar PD8130/PD8150 Installation/Operation Manual 15
PREL
I
MINA
R
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the PD8130/PD8150 installation process. The
sections following this one provide detailed instructions.
Installation should be performed by a qualified custom
video installation specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, Refer to
page...
1 Choose a location for the projector 16
2 Mount the projector 21
3 Connect signal sources to the PD8130/PD8150 23
4 Connect external controller to RS-232 port and/or IR
repeater system (optional)
27
5 Connect 12-volt trigger output to retractable screen
or other, +12V trigger-activated equipment
(optional)
28
6 Apply power to the projector 29
7 Change the OSD Language (optional) 29
8 For rear-screen and/or ceiling-mount installations,
select the proper picture orientation
30
9 Primary lens adjustments: projected image size
(zoom), position (shift) and focus
18, 30
10 Projector calibration: adjust the following for each
input; save settings when finished:
Aspect ratio
Brightness
Contrast
Color level
Tint
Input position
37
Note