Filter
Top Products
System Configuration
15
Figure 4-9: Fixed IP set-up screen
Step 2
Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/
Routed Mux, Classical IP over ATM). And Disable “Bridge” function.
Step 3
Click “submit” to commit modifications you’ve done, then click “Save Configuration”
to store settings. (Modifications will not take effects until next reboot.)
Step 3
Click on “NAT” tab on left panel, and enable the NAPT function in the option menu.
Step 4
Click “Save settings” on left panel to write configuration into machine, and reboot to
make settings effective.
Dynamic IP for WAN
If ISP provides a dynamic IP for Internet connection, following steps illustrate how to
enable the connection via ADE-3000.
Step 1
Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/
Routed Mux, Classical IP over ATM). And Disable “Bridge” function.
Step2
Check the DHCP option, and fill in the Host Name field (if required.) (This information
should be obtained from ISP. If there is no special demand for this, leave this column
blank.)
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com