Filter
Top Products
ADE-3000 User Manual
24
To add a Virtual Server:
Step 1
Select the public port number used by the service, ranged from 0 to 65535.
Step 2
Select the private port number used on internal server mapping to public port, it is not
required to be the same as public port number.
Step 3
Select appropriate communication type via type of port checkbox.
Step 4
Enter the Host IP Address of local server that you want the Internet users to be able
to access.
Step 5
Click the “Add This Setting” button to save the settings.
Step 6
Click “Save settings” on left panel to write configuration into machine, and reboot to
make settings effective.
Figure 4-21: Virtual Server Configuration Screen
Bridge Filtering
The Bridge Filtering configuration page allows you to set the configuration of IP
filtering. You can add 4 records max.
Source MAC
When the bridge filtering is enabled, enter the Source MAC address, select Block
and click Add. Then all incoming WAN and LAN Ethernet packets matched with this
source MAC address will be filtered out. If the Forward is selected, then the packets
will be forwarded to the destination PC.
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com