Filter
Top Products
ADE-3000 User Manual
16
Figure 4-10: DHCP client enable
Step 3
Click on “NAT” tab on left panel, and enable the NAPT function in the option menu.
Step 4
Click “Save settings” on left panel to write configuration into machine, and reboot to
make settings effective.
Other settings
Here are explanations about some fields not mentioned above.
MAC Spoofing
The MAC Spoofing is developed to solve the scenario when the ISP only recognizes
one MAC address. Copy the ISP-recognized MAC address here.
Figure 4-11: MAC Spoofing
ATM
If your ISP provides this information to you, fill it in appropriate field.
Service Category
UBR and CBR are two different types of service supported from the ATM.
Bandwidth
Bandwidth setting takes effect only when the CBR is selected. The maximum available
bandwidth is from the upstream data rate of ADSL status page (see Section, ADSL).
Figure 4-12: ATM Bandwidth Category
IGMP
Support IGMP proxy/relay function for ADSL modem, based on the following
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com