Filter
Top Products
System Configuration
19
LAN Configuration
The LAN IP and Subnet Mask of ADE-3000 are the values seen by the users on their
internal network. The default IP is 10.0.0.2 for IP and 255.0.0.0 for Subnet Mask.
Figure 4-13: LAN Configuration
DHCP Setting
A DHCP (Dynamic Host Configuration Protocol) Server automatically assigns IP
address to each computer on your network. Unless you already have one, it is highly
recommended that your router be set up as a DHCP server..
•System Allocated
The DHCP address pool is based on LAN port IP address plus 12 IP addresses.
For example, the LAN IP address is 10.0.0.2; the DHCP address pool is at the
range of 10.0.0.3 to 10.0.0.14.
• User Defined
The DHCP address pool is at the range of User Defined Start Address and User
Defined End Address. Maximum IP pool size in ADE-3000 is 253.
IP address range: 255 total IP addresses – 1 broadcast address – 1 LAN port IP
address.
• Lease time
The Lease time is the amount of time of a network user will be allowed to connect
with DHCP server. If all fields are 0, the allocated IP addresses will be effective
forever.
• User mode
Single User mode: DHCP server only allocates one IP address to local PC.
Multiple User mode: DHCP server allocates the IP addresses specified bye the
DHCP address pool.
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com