Filter
Top Products
ADE-4000 User Manual
6
If required, use a standard LAN cable to connect the "Uplink" port to a standard port
on another hub.
Step 3
Connect WAN Cable
Connect one end of the RJ-11 phone cord to the LINE port on your ADSL modem.
Connect the other end of the RJ-11 phone cord to your wall phone jack.
Step 4
Power Up
Connect the supplied power adapter to ADE-4000 and power up.
Use only the power adapter provided. Using a different one may cause hardware
damage
Step 5
Check the LEDs
If there is no cable or wrong cable connected, LAN LED on ADE-4000 should flash
in Red, then turn OFF. If it stays Red, there might be a hardware error.
For each LAN (PC) connection, the LAN Link/Act LED should be ON (provided the
PC is also ON.)
The ADSL LED should be ON.