Filter
Top Products
Introduction
3
Physical Details
Front Panel
The front panel of ADE-4000 has 2 LEDs for one LAN port and one ADSL port.
Figure 2 displays a front panel of the router.
Figure 1-2: Front Panel
LED definitions
Rear Panel
Figure 1-3: Rear Panel
Button definition
Reset Button This button has two (2) functions:
• When pressed and released, ADE-4000 will reboot
(restart).
• When reset button is pressed over 5 seconds and
then release. ALL data will be clear and restore ALL
settings to the factory default values.
Restore Default IP Address and Clear Password
If ADE-4000's IP Address or password is lost, the following procedure can be used
to recover from this situation.
Pressing the Reset button for more than 5 seconds. ADE-4000 will restore to
factory default setting. Note that this should be done only when you had tried all the
troubleshooting options. Pressing the Reset button during operation may bring you
ADSL On – ADSL LED status will be on after chaining procedure
with DSLAM is completed
LNK/ACT On – LED will be on while RJ-45 connector is plugged in.