Filter
Top Products
ADE-4000 User Manual
26
Figure 4-21: Virtual Server Configuration Screen
Bridge Filtering
The Bridge Filtering configuration page allows you to set the configuration of IP
filtering. You can add 4 records max.
Source MAC
When the bridge filtering is enabled, enter the Source MAC address, select Block
and click Add. Then all incoming WAN and LAN Ethernet packets matched with
this source MAC address will be filtered out. If the Forward is selected, then the
packets will be forwarded to the destination PC.
Destination MAC
When the bridge filtering is enabled, enter the Destination MAC address, select
Block and click Add. Then all incoming WAN and LAN Ethernet packets matched
with this destination MAC address will be filtered out. If the Forward is selected,
then the packets will be forwarded to the destination PC.
Type
Enter the hexadecimal number for the Ethernet type field in Ethernet_II packets.
For example, 0800 is for IP protocol.