Filter
Top Products
System Configuration
15
Figure 4-8: PPP setting Screen
Step 3
Click on “NAT” tab on left panel, and enable the NAPT function in the option menu.
Step 4
Click “Save settings” on left panel to write configuration into machine, and reboot
to make settings effective.
Fixed IP for WAN
If your ISP has assigned static IP address (See Appendix A About Static and Dy-
namic IP Address), you may connect to the Internet by using a fixed, or static
address. To set up a Fixed IP for WAN, do the following steps as an example.
Step 1
Enter the information of Default Gateway, IP Address, and Subnet Mask provided
by ISP. Note: These parameters are required for building up connection. If one of
these information incorrect or unavailable, please contact your ISP for correct
information.