Filter
Top Products
Introduction
5
Rear Panel
Figure 3: Rear Panel
Power port
Connect the supplied power adapter here.
10/100BaseT
LAN connec-
tions
Use standard LAN cables (RJ45 connectors) to connect your
PCs to these ports.
Note:
Any LAN port on the ADSL Wireless Firewall Router will auto-
matically function as an "Uplink" port when required. Just
connect any port to a normal port on the other hub, using a
standard LAN cable.
Reset Button
(Reset to De-
faults)
This button will reset the ADSL Wireless Firewall Router to the
factory default settings.
To do this, press and hold the Reset Button for five (5) sec-
onds, until the Status LED is lit, then release the Reset Button,
and wait the ADSL Wireless Firewall Router to restart using the
factory default values.
ADSL port
(ADSL port)
Connect this port to your ADSL line.