Filter
Top Products
ADSL Wireless Firewall Router User Guide
46
Incoming Rules
This screen is displayed when the "Add" or "Edit" button for Incoming Rules is clicked.
Figure 31: Inbound Services Screen
Data – Incoming Rules Screen
Inbound Services
Service
Select the desired Service. This determines which packets are
covered by this rule. If necessary, you can define a new Service on
the "Services" screen, by defining the protocols and port numbers
used by the Service.
Action
Select the desired action for packets covered by this rule:
• ALLOW always
• ALLOW by schedule, otherwise Block
• BLOCK always
• BLOCK by schedule, otherwise Allow
Note:
• Any inbound traffic which is not allowed by rules you create will
be blocked by the Default rule.
• BLOCK rules are only useful if the traffic is already covered by
an ALLOW rule. (That is, you wish to block a sub-set of traffic
which is currently allowed by another rule.)
• To define the Schedule used in these selections, use the
"Schedule" screen.
Send to
LAN Server
Select the PC or Server on your LAN which will receive the in-
bound traffic covered by this rule.
WAN Users
These settings determine which packets are covered by the rule,
based on their source (WAN) IP address. Select the desired
option:
• Any - All IP addresses are covered by this rule.
• Address range - If this option is selected, you must enter the
desired values in the "Single/Start" and "Finish" fields to de-
termine the address range.
•
Single address
-
Enter the required address in the "Si
n-