Planet Technology BT-510U Network Card User Manual


 
If BIP is supported: use "Image transfer" under Bluetooth Information
Exchanger to send images
Q: Cannot connect to the Internet.
The telephone number of the connection (i.e., the telephone number for the
access point of your Internet service provider) may not be correct. Please
check the telephone number.
The user ID and/or password for the provider with whom you have signed up
may have been entered incorrectly. Please check the user ID and password.
The default connection may have been configured with different settings.
Please set the connection configured for mobile telephone use as the
default
connection
.
Q: Cannot send or receive faxes.
Once you have registered a mobile telephone as your fax server, you will
need to enter the fax settings from the [Printer and Faxes] window in the
Control Panel.
Please refer to "
Using a modem station for fax transmissions" for information
on the configuration procedure.
The telephone number of the fax destination may have been entered
incorrectly. Please check the telephone number.
If the setting under COM Auto Connect Settings has been set to "Off", a
connection will not automatically be established with the modem. Please
connect to the mobile telephone manually.
The fax service may not have been enabled for sending (or receiving).
Please check the settings by following the procedure below.
1. Open [Printers and Faxes] from the Control Panel, right-click on
the [Fax] icon, and then click on [Properties].
The [Fax properties] window will appear.
146