Filter
Top Products
- 6 -
1.4 Specification
Model
FGSW-1820CS FGSW-2620CS
Hardware Specification
Ports
16 10/ 100Base-TX RJ-45
Auto-MDI/MDI-X ports
24 10/ 100Base-TX RJ-45
Auto-MDI/MDI-X ports
Gigabit ports
2 10/100/1000Mbps ports share with 2 SFP interfaces
Switch Processing Scheme
Store-and-Forward
Throughput (packet per second)
5.35Mpps. 6.54Mpps
Switch Fabric
7.2Gbps. 8.8Gbps
Address Table
4K entries
Share Data Buffer
2.75Mb embedded memory for packet buffers
Flow Control
Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
Dimensions
440 x 120 x 44 mm (1U height)
Weight
1.56 kg 1.64 kg
Power Requirement
100~240V AC, 50-60 Hz, 0.5A
Power Consumption / Dissipa-
tion
16 watts / 54BTU 19 watts / 64BTU
Temperature
Operating: 0~50 degree C
Storage: -40~70 degree
Humidity Operating:
5% to 90%, Storage: 5% to 90% (Non-condensing)
Smart function
System Configuration
Web interface
Port configuration
Port speed duplex mode selection. Flow control disable / enable. Port dis-
able / enable. Port description on each port
Bandwidth Control
Yes, 1 / 2 / 4 / 8 / 16 / 32 / 64Mbps
Broadcast Storm Control
Yes, 5% / 10% / 25% / 50% / Disable
Port Statistics
Display each port’s detail Ethernet traffic counter information
VLAN
18/26 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
Port trunking
Support 2 groups of 4-Port trunk support, up to 800Mbps bandwidth per
trunk
Port Mirroring
Port mirroring allows monitoring of the traffic across any port in real time
QoS
Allow to assign low / high priority on each port.
First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy.
MAC address / TCP & UDP filter
Yes