Filter
Top Products
5.2.2 Control Group
- 9 -
Option Description
Administrator
User Name
In default, the user name is “admin”. You can change the user name to a
simply memorize name.
Administrator
Password
In default, the password is “admin”. Please change the password to IP
Power Manager in the first time configuration. That can prevent
unauthorized user access to IP Power Manager.
BOOTP/DHCP
Control
This is the parameter enabling or disabling the Boot Protocol (BOOTP) /
Dynamic Host Configuration Protocol (DHCP) process. These protocols
are used to obtain a dynamic IP address from a BOOTP / DHCP server.
TFTP Upgrade
Control
You can upgrade IP Power Manager via TFTP protocol when this option
enabled.
Ping Echo Control
Enable/Disable the IP Power Manager to respond to Ping requests. For
protect IP Power Manager when they are connect to Internet. We will
suggest you enable this option to let your IP Power Manager stop
response the ping command.
Input Phase
Detection
IP Power Manager will detect the input power phase to make sure the
connected device can receive the correct power input. When input power
phase is reverse, IP Power Manager will display error code “E16” on
7-Segment LED. Please try to make the input power phase correct. Or
you can disable this function temporally with this option.
Telnet Control
This is the parameter enabling or disabling the terminal to the server
application (Telnet) control process. (e.g. telnet 192.168.1.1). The user
may configure the Telnet protocol to use a port number other than the