Filter
Top Products
Option Description
Configure System
System Name
This field allows the user to set the value in System name that is
defined in MIB-II or to view the current setting. Size is 31 characters.
System Contact
This field allows the user to set the value in System manager (System
Contact) that is defined in MIB-II or to view the current setting. Size is
31 characters.
System Location
This field allows the user to set the value in System installation place
(System Location) that is defined in MIB-II or to view the current
setting. Size is 31 characters.
SNMP Read
Community
This field allows the user to set the read level community of SNMP or
to view the current setting. Size is 31 characters.
SNMP Write
Community
This field allows the user to set the write level community of SNMP or
to view the current setting. Size is 31 characters.
History Log Interval
This field allows the user to set the polling time (in seconds) of the
Input, Output and EMD (if connected) information. The readings will
be stored in the history log.
Administrator User Name and Password
Administrator User
Name
You may enter the administrator user name, and the default value is
“admin”. Size is 31 characters.
Administrator
Password
You may set the administrator password, and the default value is
“admin”. Size is 31 characters.
Confirm Administrator
Password
Confirm the password again, and the value should be the same as
“Administrator Password”. Size is 31 characters.
Control
Reset to Default
All of the configurations will reset to the default value.
Restart System
You may restart the system by click the button.
- 24 -
6.3.2 Multi-User
This page allows user to add or remove the IP Power Manager's multi-user list dynamically.
The maximum schedule is 10.