Filter
Top Products
PLANET IP PBX user’s manual
Add a Route
1. Enter the IP Route ID, Subnet, Netmask, and Gateway.
2. Click ADD to have the newly added route in IP Rout ID.
Edit a Route
1. Edit the information in a row.
2. Click “APPLY” in the row to update the information.
Only Delete a Route
1. Select a route ID.
2. Click DEL to remove the route ID from the IP Route ID
column.
2.6 Dynamic DNS Setup
Dynamic WAN IP address causes difficulty for inbound connections from remote clients or IP PBX
systems. A popular work-around is to adopt domain names provided by Dynamic DNS service
providers and run a client on or behind the gateway router (or IP PBX). It is required to apply an
account and create a hostname in the account before configuration. Click Enable, give account
information and refresh interval to activate a Dynamic DNS client. The client then uses Username
and Password to access its account and update the Hostname with the latest WAN IP address at
DynDNS or 3322.net Service in Interval seconds periodically.
Enable Dynamic DNS
Typical hostname has a form of <hostname>.dyndns.org or
<hostname>.3322.net. The refresh interval is usually between
60 – 600 seconds depending on the volatility of WAN IP
assignment.
1. Click Enable.
2. Click DynDNS or 3322.net in the Service list.
3. Enter the Username, Password, Hostname, and
Interval.
4. Click APPLY.
Disable Dynamic DNS Click Disable, and then click APPLY.