Filter
Top Products
PLANET IP PBX user’s manual
going concurrently using different room numbers. Before entering a meeting room, the caller has to
enter the correct PIN of the room number.
Note: The administrator who invited another meet-me conference room must drop all parties by
pressing *5 when the meeting ends.
Select Feature -> Meet-me Conference to configure meet-me conference feature.
Add a Meet-me Conference
1. Enter settings shown in Table 5.2.
2. Click ADD to add a new conference room.
The newly added room should display in the Room
Number.
Edit a Meet-me Conference
1. Edit settings shown in a row.
2. Click APPLY at the end of the row to update the
information.
Delete a Meet-me Conference
1. Select a room number.
2. Click DEL to remove the conference room from
the Room Number.
Table 5.2 Meet-me Conference Configuration Settings
Field Description
Room Number
Meeting room number, e.g. 8000.
Description
Arbitrary description information.
PIN to Join
PIN for normal users to join the conference.
During a conference, a normal user has following options:
- # to quit conference
- *1 to mute/unmute
- *9 to log in as the administrator if there is no
administrator dialed in yet.
Administrator PIN
PIN for the administrator of the conference.