Filter
Top Products
PLANET IP PBX user’s manual
Add a User Group
1. Enter a usergroup name beside the ADD button, and then
click ADD.
2. The name will show in Group ID.
3. Click the name in Group ID to view the edit page.
4. Enter settings shown in Table 4.2.
5. Click SET to save the settings, and click BACK to return to
the USERGROUP MANAGEMENT page.
Now, you can see the newly added usergroup displayed in the
Group ID.
Edit a User Group
1. Click a usergroup name in the Group ID.
2. Edit settings shown in Table 4.2.
3. Click SET.
Delete a User Group
1. Select a Group ID.
2. Click DEL to remove the usergroup from the Group ID.
Table 4.2 Usergroup Configuration Settings
Field Description
Group ID
A unique group name containing alphabets, numbers, and
underscore only without spaces; 32 characters maximum.
Description
Arbitrary description information.
Associated Trunks
Select outbound SIP trunks and PSTN trunks accessible by
this usergroup. Note the order matters the hunting
sequence in run-time.
Group ID: The default number is “0”. A trunk with Group ID
“0” does not form a balance group with any other trunks in
Group 0. If Group ID is 1~9, trunks with the same Group ID
form a usage balance group.
Weight: the weight of a trunk to be selected in a trunk
balance group for an outgoing call.
) Trunks with the same group ID must be put together, or
the function will not work.
) If there is not any appropriate SIP trunk and PSTN trunks
to select, come back later to revise selection once
trunks have been created.