Filter
Top Products
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
355
5.5 System Management Commands
These commands are used to control system logs, passwords, user names, browser configuration options, and display or
configure a variety of other system information.
Command Group Function
Device Designation
Configures information that uniquely identifies this switch
Banner Information
Configures administrative contact, device identification and location
System Status
Displays system configuration, active managers, and version information
Frame Size
Enables support for jumbo frames
File Management
Manages code image or switch configuration files
Line
Sets communication parameters for the serial port, including baud rate and console time-out
Event Logging
Controls logging of error messages
SMTP Alerts
Configures SMTP email alerts
Time (System Clock)
Sets the system clock automatically via SNTP server or manually
Switch Clustering
Configures management of multiple devices via a single IP address
Table 5-6 System Management Commands
5.5.1 Device Designation Commands
Command Function Mode
hostname
Specifies the host name for the switch GC
snmp-server contact
Sets the system contact string GC
snmp-server location
Sets the system location string GC
Table 5-7 Device Designation Commands
hostname
This command specifies or modifies the host name for this device. Use the no form to restore the default host name.
Syntax
hostname name no hostname name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#hostname RD#1