Filter
Top Products
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
452
sessions and SSH sessions.
The SSH server uses DSA or RSA for key exchange when the client first establishes a connection with the switch, and
then negotiates with the client to select either DES (56-bit) or 3DES (168-bit) for data encryption.
You must generate DSA and RSA host keys before enabling the SSH server.
Example
Console# ip ssh crypto host-key generate
Console#configure
Console(config)#ip ssh server
Console(config)#
Related Commands
ip ssh crypto host-key generate
show ssh
ip ssh timeout
This command configures the timeout for the SSH server. Use the no form to restore the default setting.
Syntax
ip ssh timeout seconds no ip ssh timeout seconds – The timeout for client response during SSH negotiation. (Range:
1-120)
Default Setting
10 seconds
Command Mode
Global Configuration
Command Usage
The timeout specifies the interval the switch will wait for a response from the client during the SSH negotiation phase.
Once an SSH session has been established, the timeout for user input is controlled by the exec-timeout command for vty
sessions.
Example
Console(config)#ip ssh timeout 60
Console(config)#
Related Commands