Filter
Top Products
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
523
802.1Q-tunnel Mode: NORMAL
802.1Q-tunnel TPID: 8100(Hex)
Console#
Field Description
Broadcast Threshold
Shows if broadcast storm suppression is enabled or disabled; if
enabled it also shows the threshold level
LACP Status
Shows if Link Aggregation Control Protocol has been enabled or
disabled
Ingress Rate Limit
Shows if ingress rate limiting is enabled, and the current rate limit.
Egress Rate Limit
Shows if egress rate limiting is enabled, and the current rate limit.
VLAN Membership Mode
Indicates membership mode as Trunk or Hybrid
Ingress Rule
Shows if ingress filtering is enabled or disabled. Note: Ingress
filtering is always enabled.
Acceptable Frame Type
Shows if acceptable VLAN frames include all types or tagged
frames only
Native VLAN
Indicates the default Port VLAN ID.
Priority for UntaggedTraffic
Indicates the default priority for untagged frames
GVRP Status
Shows if GARP VLAN Registration Protocol is enabled or disabled
Allowed VLAN
Shows the VLANs this interface has joined, where “(u)” indicates
untagged and “(t)” indicates tagged
Forbidden VLAN
Shows the VLANs this interface can not dynamically join via GVRP
Private VLAN Mode
Shows the private VLAN mode as host, promiscuous, or none
Private VLAN
Host-association
Shows the secondary (or community) VLAN with which this port is
associated
Private VLAN Mapping
Shows the primary VLAN mapping for a promiscuous port
802.1Q-tunnel Status
Shows if 802.1Q tunnel is enabled on this interface
802.1Q-tunnel Mode
Shows the tunnel mode as Normal, 802.1Q Tunnel or 802.1Q
Tunnel Uplink
802.1Q-tunnel TPID
Shows the Tag Protocol Identifier used for learning and switching
packets
Table 5-53 Interfaces Switchport Statistics