Filter
Top Products
User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
212
6. Command Line Mode
The CLI groups all the commands in appropriate modes according to the nature of the command. A sample of the CLI command
modes are described below. Each of the command modes supports specific software commands.
Command Groups:
System System settings and reset options
IP IP configuration and Ping
Port Port management
Aggr Link Aggregation
LACP Link Aggregation Control Protocol
RSTP Rapid Spanning Tree Protocol
Dot1x IEEE 802.1X port authentication
IGMP Internet Group Management Protocol snooping
LLDP Link Layer Discovery Protocol
MAC MAC address table
VLAN Virtual LAN
PVLAN Private VLAN
QoS Quality of Service
ACL Access Control List
Mirror Port mirroring
SNMP Simple Network Management Protocol
Stack Stack management
Firmware Download of firmware via TFTP
6.1 System Command
System Configuration
Description:
Show system configuration.
Syntax:
System Configuration [all] [<port_list>]
Parameters: