Filter
Top Products
3.2.4 AP Bridge - Point to Point Mode
This function provides to bridge for 2 wired Ethernet networks to connect to each other by
wireless. You can use two WAP-4030s in this mode to connect two wired Ethernet networks
together.
Parameter
Description
Mode Shows the current operation mode. You may set WAP-4033PE to other operating
mode by select other operating mode.
Band
2.4GHz (B): It allows to select the transmit rate up to 11Mbps.
2.4GHz (G): It allows to select the transmit rate up to 54Mbps.
2.4GHz (B+G): It provides best performance for 11g transmission when you
enable the AP mode selection to “Mixed mode”.
Channel Number Select the appropriate channel from the list provided to correspond with your
network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
MAC Address 1
Keep default setting: WAP-4033PE will use it’s own MAC address to access the
wireless LAN.
Press “MAC Clone” button: It will use PC’s MAC address to access the
wireless LAN.
Set Security IF you want to enable security to protect your wireless connection. Please press
“Set Security” button and refer to section “3.2.8 Security setting for bridge mode”
1
7