Filter
Top Products
the bridged access points. Fill the text box by following the rules below. Hex (64
characters): input 64-digit Hex values (in the “A-F”, “a-f” and “0-9” range) or at least
8 character pass phrase as the pre-shared keys.
After configuration complete, please click “Apply” button to save the configuration. Then you will
see a screen to prompt you the settings are save successfully. You may press “Continue” for
configure other settings or “Apply” to restart WAP-4033PE with new configuration.
3.3 Advanced Settings
You can set advanced parameters of this access point. The parameters include Authentication
Type, Fragment Threshold, RTS Threshold, Beacon Interval, Data Rate, Preamble Type,
Broadcast ESSID, IAPP and 802.11g Protection. You should not change these parameters
unless you know what effect the changes will have on this access point.
Parameter Description
Open
System
Wireless stations can associate with this access point without WEP
encryption.
Shared
Key:
You should also setup WEP key in the “Encryption” page and wireless
stations should use WEP encryption in the authentication phase to associate
with this access point.
Authentication
Type
Auto The wireless client can associate with this access point by using any one of
these two authentication types.
Fragment Threshold “Fragment Threshold” specifies the maximum size of packet during the
24