Filter
Top Products
Parameter Description
Firmware Upgrade This tool allows you to upgrade the Access Point’s system firmware. To upgrade
the firmware of WAP-4033PE, you need to download the firmware file to your
local hard disk, and enter that file name and path in the appropriate field on this
page. You can also use the “Browse…” button to find out the firmware file on
your PC. Please press Apply button to upgrade and reset WAP-4033PE. When
the upgrade process is complete. We will suggest you power off/on
WAP-4033PE to make the new firmware effect.
3.9 Reset
You can reset the WAP-4033PE system when it works incorrect. The reset function essentially
Re-boots your WAP-4033PE system.
Parameter Description
Reset In the event that the system stops responding correctly or in some way stops
functioning, you can perform a reset. Your settings will not be changed by reset
procedure. To perform the reset, click on the Apply button. You will be asked to
confirm your decision. Once the reset process is complete you may start using the
Access Point again.
3
5