Filter
Top Products
3.6 System Utility
From here, you can define the Access Point’s IP Address and Login Password and enable the
Access Point to be a DHCP Server.
Parameter Description
Password Settings
Current Password Enter the current password (up to 15-digit alphanumeric string) of the
Access Point. The default password for WAP-4033PE is admin. Note that
the password is case-sensitive.
New Password Enter the password (up to 15-digit alphanumeric string) you want to login
to the Access Point. Note that the password is case-sensitive.
Re-Enter Password Reconfirm the password (up to 15-digit alphanumeric string) you want to
login to the Access Point. Note that the password is case-sensitive.
Management IP
IP Address Designate the Access Point’s IP Address. This IP Address should be
unique in your network. The default IP Address is 192.168.0.1.
Subnet Mask Specify a Subnet Mask for your LAN segment. The default Subnet Mask of
3
2