Planet Technology WAP-6100 Network Card User Manual


 
Network type
Here indicates the WAP-6100 works in AP mode or Client mode
(Infrastructure mode / Ad Hoc mode).
SSID
Here displays current SSID assigned to the WAP-6100.
BSSID
The MAC address of the associated AP.
Connection status
This column shows current connection status. If WAP-6100 already connects
to an Access Point or station, here will show “Associated”. Otherwise,
connection column will show “N/A” which means no connection to any
Access Point or station.
Wireless mode
Here show the Access Point current work in 11b, 11g, or super G mode.
Current channel
This column indicates the radio channel currently in use.
Security
Here indicates AP security settings in client mode. Should be either
“Disabled”, “WEP” or ‘WPA-PSK”.
Rx data rate (Mbps)
Displays current receive data rate.
Tx data rate (Mbps)
Displays current transmit data rate.
Link quality
This column shows current link quality with AP in 0 to 100 percentage scale.
Signal strength
This column shows current signal strength with AP in 0 to 100 percentage
scale.
Activity
Displays the number of packets received and transmitted through this
WAP-6100.
4.2.2 Wireless Network