Filter
Top Products
4.2.4 Ethernet Client List
You can check all the details about Ethernet clients including IP Address and MAC Address. Press
“Refresh” if you add any new Ethernet client into network. The page will update latest status of current
Ethernet network.
4.3 Repeater Mode
Repeater is able to retransmit the signal of a remote AP. Choose repeater mode if you want to extend the
range of your original AP. In order to setup this mode, you need to choose “Repeater” mode and click
“Apply” at System Properties page. You also need to reboot the WAP-6100 to make the setting effective.