Filter
Top Products
WGS3 Layer 3 Switch User’s Manual
- 21 -
4.4 Management Setup Menu
After initially logging onto the system, adjust the communication parameters for your console to ensure a
reliable connection (Serial Port Configuration). Specify the IP addresses for the switch (Network
Configuration / IP Configuration), and then set the Administrator and User passwords ( User
Configuration). Remember to record them in a safe place. Also set the community string which controls
access to the on-board SNMP agent via in-band management software (SNMP Configuration). The items
provided by the Management Setup Menu are described in the following sections.
Menu Description
Network
Configuration
Includes IP Configuration
*1
, Ping facility, and HTTP (Web agent) setup.
Serial Port
Configuration
Sets communication parameters for the serial port, including baud rate,
console time-out, and screen data refresh interval.
SNMP Configuration Activates authentication failure traps; and configures communities and trap
managers.
User Configuration Sets the user names and passwords for system access.
TFTP Download Downloads new version of firmware to update your system (in-band).
Configuration File Download the configuration to a file or upload the configuration file to the
switch.
*1: Only displays on WGS3-2620 when it is set to Layer 2 mode.