Filter
Top Products
WGS3 Layer 3 Switch User’s Manual
- 55 -
4.5.4.2 VLAN Table Configuration
Use this screen to create a new VLAN or modify the settings for an existing VLAN.
The VLAN Table Configuration of WGS3-2620 and WGS3-404 are slightly different. For WGS3-2620,
the VLAN Table Configuration is as the following:
The configuration parameter for WGS3-2620 is as the following:
Parameter Description
VLAN The ID for the VLAN currently displayed. Range: 1-4094
Port Port entries may be marked as:
- : (Normal) Uses GVRP to determine port membership.
S : (Static) Adds port as a static entry. GVRP protocol is disabled.
R : (Registration Fixed) Adds port as a static entry. GVRP protocol messages are still
forwarded through this port.
X : (Forbidden) Disables GVRP for this VLAN on the specified port.
If a removed port is no longer assigned to any other group as an untagged port, it will
automatically be assigned to VLAN group 1 as untagged.
NOTE: Use the <Next Page> and <Prev Page> buttons to scroll through the table. To display a specific
page, set the page number in the Page field and press <Apply>. To modify a VLAN group,
highlight the entry in the table and press Enter. To add a VLAN group, press <Add>.