Planet Technology WSW-2401 Switch User Manual


 
39
each port
Ø Priority: allow to set high, low and disable priority function
Ø Security: allow user to enable security function. When this function is enabling, the port
will locked without permission of address learning.
Ø After setup complete, click Apply button
4.4-5 Trunking
This section display the detail status of trunking
4.4-5-1 Aggregator Setting
Ø System priority: A value used to identify the active LACP. The Switch with lowest value
has the highest priority and is selected as the active LACP
Ø Group ID: there are provide seven trunk groups, choose the Group ID and click Select
button
Ø LACP: allow user enable or disable LACP function. If enable, the group is LACP static
trunk group. If disable, the group is local static trunk group. All port support LACP
dynamic trunking group, if connecting the device that also support LACP, the LACP
dynamic trunking group will be create automatically
Ø Works port: allow max four ports can be aggregated at the same time. If LACP static
trunk group, the exceed ports are standby and able to aggregate if work ports fail. If it is
local static trunk group, the number must be as same as the group member ports.
Ø Select the ports to join the trunk group. Click Add button to add ports.
Ø Click Remove button to remove unwanted ports
Ø Click Apply button to take effect and use Delete button to delete trunk group